View B39212B7959P810_1880769.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

? epcos ag 2011. reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without epcos prior express consent is prohibited. saw components saw duplexer w-cdma band 4 / cdma 1x aws band series/type: ordering code: b7959 B39212B7959P810 date: version: feburary 11, 2011 2.2
2 february 11, 2011 b7959 1732.5 / 2132.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet application n low-loss saw duplexer for mobile telephone w-cdma band 4 (umts) / cdma 1x aws systems n low insertion attenuation n low amplitude ripple n usable passband 45 mhz n single-ended to balanced transformation in antenna-rx path n impedance transformation 50 w to 100 w in antenna-rx path n high isolation between tx and rx features n package size 2.5 * 2.0 * 0.89 mm 3 n rohs compatible n approximate weight 0.017 g n package for s urface m ount t echnology ( smt ) n ni, au-plated terminals n balanced rx port, unbalanced tx port n e lectrostatic s ensitive d evice ( esd ) n fully matched by integrated matching network n m oisture s ensitive l evel 3 bottom view side view top view 7 5 8 1 9 4 32 6 0.4 2.5 0.55 31 8 57 2 6 4 2.0 0.89 0.3 0.4 0.9 pin configuration n 3 tx input, unbalanced n 1, 8 rx output, balanced n 6 antenna n 2, 4, 5, 7, 9 to be grounded
3 february 11, 2011 b7959 1732.5 / 2132.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristics for w-cdma band 4 temperature range for specification: t = C15?c to +80 ?c tx terminating impedance: z tx =50 w ant terminating impedance: z ant =50 w rx teminating impedance: z rx = 100 w (balanced) || 8.2nh characteristics tx-antenna min. typ. @ 25 ?c max. center frequency f c - 1732.5 - mhz maximum insertion attenuation a w-cdma 1) 1) attenuation of w-cdma signal (power transfer function). please, refer to page 9 of this docu- ment. @f carrier 1712.4 ... 1752.6mhz - 1.6 1.8 db amplitude ripple (p-p) da w-cdma 1) @f carrier 1712.4 ... 1752.6mhz - 0.3 0.5 db error vector magnitude evm 2) 2) error vector magnitude (evm) based on definition given in 3gpp ts 25.141 @f carrier 1712.4 ... 1752.6mhz - 0.5 2.0 % input vswr (tx port) 1710.0 ... 1755.0mhz - 1.7 2.0 output vswr (ant port) 1710.0 ... 1755.0mhz - 1.6 2.0 attenuation a 10.0 ... 1565.4mhz 30 37 - db 728.0 ... 764.0mhz 39 43 - db 851.0 ... 894.0mhz 37 41 - db 1565.4 ... 1573.3mhz 40 48 - db 1573.3 ... 1577.5mhz 45 51 - db 1577.5 ... 1585.5mhz 40 50 - db 1597.5 ... 1605.9mhz 45 50 - db 1805.0 ... 1880.0mhz 20 43 - db 1930.0 ... 1990.0mhz 38 42 - db @f carrier 2112.4 ... 2152.6mhz a w-cdma 1) 43 47 - db 2400.0 ... 2500.0mhz 32 35 - db 3410.0 ... 3520.0mhz 20 32 - db 5120.0 ... 5350.0mhz 20 23 - db 5725.0 ... 5850.0mhz 20 25 - db
4 february 11, 2011 b7959 1732.5 / 2132.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet characteristics for w-cdma band 4 temperature range for specification: t = C15 ?c to +80 ?c tx terminating impedance: z tx =50 w ant terminating impedance: z ant =50 w rx teminating impedance: z rx = 100 w (balanced) || 8.2nh characteristics antenna-rx min. typ. @ 25 ?c max. center frequency f c - 2132.5 - mhz maximum insertion attenuation a w-cdma 1) 1) attenuation of w-cdma signal (power transfer function). please, refer to page 9 of this docu- ment. @f carrier 2112.4 ... 2152.6mhz - 2.0 2.3 db amplitude ripple (p-p) da w-cdma 1) @f carrier 2112.4 ... 2152.6mhz - 0.2 0.5 db input vswr (ant port) 2110.0 ... 2155.0mhz - 1.3 2.0 output vswr (rx port) 2110.0 ... 2155.0mhz - 1.4 2.0 cmrr (|s 32 -s 42 |/|s 32 +s 42 |) 2110.0 ... 2155.0mhz 22 2) 2) a combination of 10 ? phase balance and 1 db amplitude balance corresponds to 19.6 db cmrr 25 - db imd product level limits 3) at f tx =1732.5 mhz, f rx = 2132.5 mhz 3) imd product level limits for power levels p tx =21.5 dbm (antenna port output power) and p blocker =-15dbm (antenna port input power) blocker 1 400.0mhz -130 dbm blocker 2 1332.5mhz -107 dbm blocker 3 3865.0mhz -117 dbm blocker 4 5597.5mhz -130 dbm
5 february 11, 2011 b7959 1732.5 / 2132.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristics for w-cdma band 4 temperature range for specification: t = -15 ?c to +80 ?c tx terminating impedance: z tx =50 w ant terminating impedance: z ant =50 w rx teminating impedance: z rx = 100 w (balanced) || 8.2nh characteristics antenna-rx min. typ. @ 25 ?c max. attenuation a 1.0 ... 1710.0 mhz 35 53 - db @f carrier 1712.4 ... 1752.6 mhz a w-cdma 1) 1) attenuation of w-cdma signal (power transfer function). please, refer to page 9 of this docu- ment. 45 58 - db 1755.0 ... 2025.0 mhz 30 38 - db 2240.0 ... 2400.0 mhz 15 40 - db 2400.0 ... 2484.0 mhz 30 44 - db 2484.0 ... 6000.0 mhz 35 46 -db characteristics tx-rx min. typ. @ 25 ?c max. differential mode isolation a 1574.0 ... 1577.0 mhz 40 60 - db 1712.4 ... 1752.6 mhz a w-cdma 1) 1) attenuation of w-cdma signal (power transfer function). please, refer to page 9 of this docu- ment. 55 60 - db 2112.4 ... 2152.6 mhz a w-cdma 1) 50 54 -db 3410.0 ... 3520.0 mhz 20 60 -db 5120.0 ... 5275.0 mhz 20 60 -db common mode isolation a 1712.4 ... 1752.6 mhz a w-cdma 1) 50 53 - db
6 february 11, 2011 b7959 1732.5 / 2132.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet characteristics for cdma 1x aws band temperature range for specification: t = C30 ?c to +85 ?c tx terminating impedance: z tx =50 w ant terminating impedance: z ant =50 w rx teminating impedance: z rx = 100 w (balanced) || 8.2nh characteristics tx-antenna min. typ. @ 25 ?c max. center frequency f c - 1732.5 - mhz maximum insertion attenuation a 1710.00 ... 1755.00 mhz - 1.6 2.0 db amplitude ripple (p-p) da 1710.00 ... 1755.00 mhz - 0.3 0.7 db input vswr (tx port) 1710.00 ... 1755.00 mhz - 1.7 2.0 output vswr (ant port) 1710.00 ... 1755.00 mhz - 1.6 2.0 attenuation a 10.0 ... 1565.4 mhz 30 37 - db 728.0 ... 764.0 mhz 39 43 - db 851.0 ... 894.0 mhz 37 41 - db 1565.4 ... 1573.3 mhz 40 48 - db 1573.3 ... 1577.5 mhz 45 51 - db 1577.5 ... 1585.5 mhz 40 50 - db 1597.5 ... 1605.9 mhz 45 50 - db 1805.0 ... 1880.0 mhz 20 43 - db 1930.0 ... 1990.0 mhz 38 42 - db 2110.0 ... 2155.0 mhz 43 47 - db 2400.0 ... 2500.0 mhz 32 35 - db 3410.0 ... 3520.0 mhz 20 32 - db 5120.0 ... 5350.0 mhz 20 23 - db 5725.0 ... 5850.0 mhz 20 25 - db
7 february 11, 2011 b7959 1732.5 / 2132.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristics for cdma 1x aws band temperature range for specification: t = C30 ?c to +85?c tx terminating impedance: z tx =50 w ant terminating impedance: z ant =50 w rx teminating impedance: z rx = 100 w (balanced) || 8.2nh characteristics antenna-rx min. typ. @ 25 ?c max. center frequency f c - 2132.5 - mhz maximum insertion attenuation a 2110.00 ... 2155.00 mhz - 2.0 2.4 db amplitude ripple (p-p) da 2110.00 ... 2155.00 mhz - 0.3 0.7 db input vswr (ant port) 2110.00 ... 2155.00 mhz - 1.3 2.0 output vswr (rx port) 2110.00 ... 2155.00 mhz - 1.4 2.0 cmrr (|s 32 -s 42 |/|s 32 +s 42 |) 2110.0 ... 2155.0 mhz 22 1) 1) a combination of 10 ? phase balance and 1 db amplitude balance corresponds to 19.6 db cmrr 25 - db attenuation a 1.0 ... 1710.0 mhz 35 53 - db 1710.0 ... 1755.0 mhz 45 58 - db 1755.0 ... 2025.0 mhz 30 38 - db 2240.0 ... 2400.0 mhz 15 40 - db 2400.0 ... 2484.0 mhz 30 44 - db 2484.0 ... 6000.0 mhz 35 46 -db
8 february 11, 2011 b7959 1732.5 / 2132.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet characteristics for cdma 1x aws band temperature range for specification: t = C30 ?c to +85 ?c tx terminating impedance: z tx =50 w ant terminating impedance: z ant =50 w rx teminating impedance: z rx = 100 w (balanced) || 8.2nh characteristics tx-rx min. typ. @ 25 ?c max. differential mode isolation a 1574.0 ... 1577.0 mhz 40 60 - db 1710.0 ... 1755.0 mhz 55 59 - db 2110.0 ... 2155.0 mhz 50 54 -db 3410.0 ... 3520.0 mhz 20 60 -db 5120.0 ... 5275.0 mhz 20 60 -db common mode isolation a 1710.0 ... 1755.0 mhz 50 53 - db
9 february 11, 2011 b7959 1732.5 / 2132.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. annotation for characteristics section attenuation of w-cdma signal (power transfer function, a w-cdma ) is determined by with f carrier according to 3gpp ts 25.101 (e.g. for umts pass band, f carrier ranges from 882.4 mhz (lowest tx channel) to 912.6 mhz (highest tx channel)). here, h rrc (f) is the transfer function of the root-raised cosine transmit pulse shaping filter according to 3gpp ts 25.101 with the following nor- malization: s s d21 f () h rrc ff carrier C () 2 f d C h rrc f () 2 f1 = d C
10 february 11, 2011 b7959 1732.5 / 2132.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet maximum ratings storage temperature range t stg C40/+85 ?c dc voltage v dc 5 v esd voltage v esd 50 1) 1) according to jesd22-a115a (machine model), 10 negative and 10 positive pulses. v machine model, 10 pulses input power at 1710.0 ... 1755.0 mhz p in 29 dbm continuous wave elsewhere p in 10 dbm 50 ?c, 5000h }
11 february 11, 2011 b7959 1732.5 / 2132.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. frequency response tx-ant (ptf) frequency response tx-ant (wideband)
12 february 11, 2011 b7959 1732.5 / 2132.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet frequency response ant-rx (ptf) frequency response ant-rx (wideband)
13 february 11, 2011 b7959 1732.5 / 2132.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. frequency response tx-rx (ptf) differential mode frequency response tx-rx (ptf) common mode
14 february 11, 2011 b7959 1732.5 / 2132.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet references type b7959 ordering code B39212B7959P810 marking and package c61157-a3-a59 packaging f61074-v8153-z000 date codes l_1126 s-parameters b7959_nb.s4p, b7959_wb.s4p see file header for port/pin assignment table soldering profile s_6001 rohs compatible defined as compatible with the following documents: "directive 2002/95/ec of the european parliament and of the council of 27 january 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/ec from april 18th, 2005, amending directive 2002/95/ec of the european parliament and of the council for the purposes of establishing the maxi- mum concentration values for certain hazardous substances in electrical and electronic equipment." moldability before using in overmolding environment, please contact your epcos sales office. matching coils see inductor pdf-catalog http:// www .tdk.co.jp/tefe02/coil.htm#aname1 and data library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm for further information please contact your local epcos sales office or visit our webpage at w ww.epcos.com . published by epcos ag surface acoustic wave components division p.o. box 80 17 09, 81617 munich, germany ? epcos ag 2011. this brochure replaces the previous edition. for questions on technology, prices and delivery please contact the sales offices of epcos ag or t he international representatives. due to technical requirements components may contain dangerous substances. for information on t he type in question please also contact one of our sales offices.
15 february 11, 2011 important notes t he following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product speci?cation is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?ed. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-speci?c notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales of?ces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product speci?cations. please check therefore to what extent product descriptions and speci?cations contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-speci?c products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the general terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, csmp, cssp, ctvs, deltacap, digisimic, dssp, formfit, miniblue, minicell, mkd, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, silvercap, simdad, simic, simid, sineformer, siov, sip5d, sip5k, thermofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.

▲Up To Search▲

Price & Availability of B39212B7959P810

	To Download B39212B7959P810 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .